phone Phone
+62213454307
menu

Sumber Berkat Abadi

sql
SmartGen HGM1790N HGM 1790N HGM-1790N Manual Remote Start Generator Pump Controller Module
Hover to Zoom

IDR 1688000,00

Spesifikasi

SmartGen HGM1790N HGM 1790N HGM-1790N Manual Remote Start Generator Pump Controller Module

Brand = SMARTGEN
Part Number = HGM1790N
Description = Manual Remote Start Generator Pump Controller Module

- Low cost controller designed to start/stop a generator manually and remotely
- Suitable for 1-3 phase gasoline and diesel gensets
- Designed for front panel mounting
- Survives cranking dropouts
- Generator protection, built-in alarms and warnings

Parameter list :
Display = LCD (with backlight)
Operation Panel = Rubber
Language = English
Digital Input = 1
Relay Output = 5
Analogue Input = 1
AC System = 1P2W
Alternator Voltage = (15~360)V(ph-N)
Alternator Frequency = 50/60Hz
kW/Amp Detecting & Display ●
Programmable Interface = USB
DC Supply = DC(8-35)V
Case Dimensions(mm) = 95*86*46.5
Panel Cutout(mm) = 78*66
Operating Temp = (-30~+80)℃

PERFORMANCE AND CHARACTERISTICS
-  Graphical LCD display(with backlight), LED indicator, touch-buttons operation;
-  Hard screen acrylic material is used to protect screen.
-  Silicone panel and buttons are adopted to increase high and low temperature adaption ability.
-  Power supply range DC (8~35)V, compatibility with 12V or 24V starter batteries;
-  Generator single phase voltage, current, frequency, power and load percentage parameters are measured and displayed:
    Generator Voltage   V          Generator Frequency   Hz
         Generator Power   kW         Generator Current      A
         Load Percentage    %
-  Precision measured and displayed electric quantity of generator:
    Oil Pressure   kPa               Temperature   ºC
    Fuel Level      %                Total Running Time   H (max. 199999 hours)
    Battery Voltage   V               Engine Speed  RPM
    Accumulated Start Times (max. 199999 times, displayed on PC)
-  With genset fault protection and display functions.
-  3 working modes: manual, auto, stop;
-  Compatibility with multiple temperature, pressure, fuel level sensors, which can be user-defined and used directly; temperature sensors, pressure sensors can be used in parallel with annunciator, providing analog quantity and increasing protection level at the same time;
-  Multiple crank disconnect conditions to select (engine speed sensor, oil pressure, generator frequency);
-  1 configurable input port which can be set as digital input or liquid level sensor;
-  4 fixed relay outputs (fuel relay, start relay, stop relay and idle relay);
-  1 configurable output port which can be set as common alarm output, fail to stop output, preheat output or idle control output;
-  Parameters can be set and modified by users and saved in internal FLASH storage, which means that they will not be lost in case of power off. Most parameters of the controller can be modified using the front panel and all parameters can be adjusted by PC software via type-B USB port;
-  Digital regulation of all parameters - instead of analog regulation using conventional potentiometer - and, therefore, higher reliability and stability;
-  Modular design, self extinguishing ABS plastic enclosure and embedded installation way; small size and compact structure with easy mounting.

Sparepart Genset

Untuk keterangan lebih lanjut, silahkan download PDF ini :

phone Telepon
Minta Penawaran